technical data sheet tnc 50 ? bulkhead jack 56K607-108N5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/11.05/3.1 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-17, mil-prf-39012, din en 122200 documents assembly instruction 51 p10 panel piercing b 3 material and plating connector parts material plating center contact beryllium copper aurodur?, gold plated outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone crimping ferrule copper flash white bronze over silver(e.g. optargen?)
technical data sheet tnc 50 ? bulkhead jack 56K607-108N5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/11.05/3.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 24 db, dc to 1 ghz ? 20 db, 1 to 6 ghz insertion loss ? 0.05 x [ghz] f db, dc to 8 ghz insulation resistance ? 5 x10 3 m ? center contact resistance ? 1.5 m ? outer contact resistance ? 1 m ? test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) ? 80 w @ 2 ghz - limitations are possible due to the used cable type ? mechanical data mating cycles min. 500 center contact captivation: axial ? 15 n coupling test torque max. 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. b shock mil-std-202, meth. 213, cond. g moisture resistance mil-std-202, meth. 106 rohs compliant tooling crimping tool 11w150-000 crimp insert 11w150-208 suitable cables rg 142 b/u, rg 223 /u, rg 400 /u weight weight 17.0 g/pce draft date approved date rev. engineering change number name date inge mhlauer 10.08.04 sa. krautenbacher 19.03.14 f00 14-0352 t. krojer 19.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
